M25x1,5 / TL=15,0mm / SW=20mm

Drain Plugs

GOST

GOST |

Drains condensed water in the housing.
Helps to avoid any potential damage to sensitive electric/electronic equipment in the housing due to condensed water.
Also allows air in the housing to breathe with the surrounding atmosphere.
Ideally it should be located at the lowest point of the housing to ensure optimum draining.

Products specifications

Material	Body	Brass, Brass Nickel Plated, Stainless Steel
	Bushing	Bronze
	O-Ring	Silicone
Ingress Protection Rating
		IP 68 - 5 Bar, 30 min
		IP 66
Operating Temperature
		Seal Material
		Silicone
		-60°C to +85°C
Thread Type
		Metric (M) EN 60423
		NPT (N) ANSI ASME B1.20.1
Accessories		Lock nuts
		Gaskets ( Washers )
Remarks		We recommend the use of lock nuts and gaskets to ensure IP rating for -
		rough surfaces or through holes.
		Accessories must be ordered separately.
		O-ring available in Metric outer threads.
Outer	Thread Size (Male)	M25x1,5
	Thread Length (TL)	15,0 mm
	Ø (D)	33,0 mm
Spanner Width		30 mm
Height (h)		16,0 mm
Part Number		IBDRV-2M

Order Coding
Part Number Mandatory	Material Mandatory	Seal Mandatory	Lock Nut Option
See table	B Brass BN Brass Nickel plated X Stainless steel	S Silicone	L Lock nut
Example
IBDRV-1M	BN	S	L

Lock Nuts